LQL-100
Rotary Lobe Pump
The principal process pump for high-viscosity media and fluids carrying solids.
- Capacity
- 15 – 90 m³/h
- Max. pressure
- 12 bar
- Connection
- DN 80 – DN 100
Overview
LQL-100 is built for continuous transfer of high-viscosity products and fluids carrying solids. A wide suction port reduces the risk of blockage with thickened sludge and pulp-bearing products.
Wear plates and rotor tips are separate parts and are renewed without replacing the casing. On abrasive duties such as wastewater and filler compounds this drives the operating cost directly.
Advantages
Bi-directional operation
Reversing the direction of rotation reverses suction and discharge, so emptying a line needs no additional equipment.
Flow proportional to speed
The positive displacement principle keeps flow proportional to shaft speed, which makes dosing over a frequency drive straightforward.
Low shear
Wide flow passages and low shaft speeds preserve the structure of particulate and shear-sensitive products.
Dry self-priming capability
The rotor geometry generates suction under a negative head, so the line does not have to be kept flooded.
Front-loading maintenance
Rotors and seals are changed through the front cover. The pump stays coupled to the line and to its drive.
Application-specific configuration
Rotor wing count, elastomer grade, seal type and connection standard are all selected for the medium.
Applications
Technical Data
| Property | Value |
|---|---|
| Capacity range | 15 – 90 m³/h |
| Maximum differential pressure | 12 bar |
| Displacement per revolution | 3.20 l/rev |
| Operating speed | 100 – 500 rpm |
| Viscosity range | 1 – 150,000 mPa·s |
| Fluid temperature | −20 … +130 °C |
| Property | Value |
|---|---|
| Port size | DN 80 – DN 100 |
| Connection types | DIN 11851, SMS, Clamp (DIN 32676) or DIN EN 1092-1 flange |
| Rotor options | Single-wing, bi-wing, tri-lobe or multi-impeller rotor |
| Shaft seal options | Single mechanical seal, flushed double mechanical seal or cartridge type |
| Casing material | 1.4404 (AISI 316L) stainless steel or EN-GJL-250 cast iron |
| Elastomers | NBR, EPDM, FKM or FFKM, selected for the medium |
| Drive | Helical geared motor, with flow control via variable frequency drive |
| Pump weight, approximate | 145 kg |
The values in this table are preliminary design figures under verification. Confirm with our engineering team before making a binding selection.
Configuration
Performance curves
Curves are issued per duty point
Performance curves are prepared for your combination of flow, pressure, viscosity and shaft speed. Request them from our engineering team.
Request Technical SupportDimensional drawing
Dimensions depend on configuration
An approved dimensional drawing and DWG file is prepared for your frame size, connection type and drive selection.
Request Technical SupportDocuments
Liquilob LQL Series product catalogue
Model technical datasheets
Performance curves
Dimensional drawings
Installation and commissioning manual
Maintenance and spare parts document
Material and seal selection table
Other frame sizes
Let us determine the right pump for your application together.
Share your fluid characteristics and operating conditions, and our engineering team will help you arrive at the right Liquilob configuration.